Wallbarn PVC Circular Roof Outlet (Smooth Flange) - H240mm - D140mm

Wallbarn PVC Circular Roof Outlet (Smooth Flange)

CIRCULAR / DOWNPIPE OUTLETS FOR INSTALLATION ACROSS THE DECK SURFACE MANUFACTURED FROM PVC. BONDED WITH ADHESIVE OR HEAT WELD.

Wallbarn also supplies outlets and drain connectors in PVC. These materials are not manufactured with perforated flanges, but they are all designed to be heat bonded to the PVC membrane, achieving a seamless bond.

They are designed to be inserted into the drainage pipe as with the other products, but they should be used only with compatible waterproofing membranes, so installers and specifiers should be sure to check with the waterproofing manufacturer.

The top of the shank has a serrated inner edge, which helps to anchor the leaf guard or gravel excluder into the hole securely.

The PVC circular / downpipe outlets are measured in the same way as the other materials, but please censure the code numbers are correct when ordering :

H is the height of the spigot or pipe

D1 is the outer diameter of the flange or surrounding ring

D2 is the inner diameter of the pipe at the top

D3 is the inner diameter of the pipe at the bottom

D4 is the outer diameter of the pipe at the top

which needs to be smaller than the inner diamter of the HDPE drainpipe (which is often measured in imperial measurements).