- Available for all tiles and slates in the BMI Redland range except Cathedral Clay Pantile, Fenland Pantile, BMI Redland 49, Postel Clay Tile and Old Hollow Pantile
- Suitable for use with concrete Half Round and Universal Angle Ridge Tiles and Rosemary Clay Half Round Ridge Tiles (300mm)
BMI Redland DryVent Ridge Regent (2.7m)
- Neat appearance
- Must not be used in a pitch below 15°
- Can be easily converted when no high level ventilation is required at the ridge
BMI Redland DryVent Ridge Regent (2.7m)
The DryVent Ridge System provides a continuous weathertight air path from the roof void to the outside within a mechanically fixed ridge, complying with the requirements of the Building Regulations. The systems neat appearance and proven security makes it an ideal choice for the discerning specifier. The system can also be easily converted when no high level ventilation is required at the ridge.
Description
- Profile Filler Units bespoke to each tile type
- Provides a neat and attractive finish to the ridge line
- Easy to install and can be used even when bad weather is expected
- Ventilates and complies with BS 5250:2011, therefore reducing the risk of harmful condensation in the roof
- Tried and tested and complies with BS 5534:2014 requirements for mechanical fixing
General Information
Compatibility
Performance
- For minimum and maximum pitches, refer to the table on the next page
- Must not be used in a pitch below 15°
Fixing
Details
- The system is suitable for traditional timber rafter, timber trussed rafter and rigid sarking constructions. The system is designed to fit a straight and level ridge line with equal pitches on either side of the ridge.
- When used with traditional timber rafters, the height of the ridge board above the apex of the rafters will alter the height of the ridge batten required.
- Ensure the ridge tile securing screw achieves a minimum 15 mm of penetration.
- Where timber sarking is used with the system, sarking is left short of apex to allow 10mm air gap, underlay is cut and turned up between counterbattens and fixed to top tiling battens. Counterbattens are extended to form an apex to support the ridge tree batten.
- A special pack (9396) is required when using Ornamental Universal Angle Ridge Tiles.
- Where Gas Flue Ridge Terminals are used with the system, Gas Flue Conversion Packs should be used. One pack per Terminal.
- Counterbattens/rafters on adjacent roof slopes must be aligned.
FREE DELIVERY on Duratech Pitched Roof Windows and Accessories on orders over £50 (Exclusions apply)
All other Delivery Charges are based on weight and location, please add products to your basket to calculate shipping.
A small amount of product lines from particular manufacturers listed below will incur a supplier delivery surcharge.
Next Day Delivery available on orders of stocked items if placed before 2pm
Deliveries will be made between 8am and 6pm. Delivery times apply to weekdays only.
Delivery of Windows to the Channel Islands, Scottish Highlands, Northern Ireland, Isle of Man
(postcodes IV, HS, KA27-28, KW, PA20-49, PA60-78, PH17-26, PH30-44, PH49-50, ZE, AB)
Basket Value | Price (£) |
---|---|
0-£249 | £20 |
Over £250 | £50 |
It is with regret that we cannot offer a service to these areas for orders over 126kg but please call us on and we will attempt to organise a delivery to your custom if required.
Supplier Delivery Charges
Please note the following supplier delivery surcharges:
Ariel Plastics = £25.00
Britmet Tileform= £35.00
Lead Products(orders under 250kg) = £50.00
Marley Eternit roof tiles (orders under a pallet) = £75.00
Marley Eternit sheeting (exclusions apply) = £50.00
Redland = £100.00
Palram = £25.00
Please phone us on if you are unsure.