Wallbarn Rubber Paving Support Pad - 7mm Thick

Wallbarn Rubber Paving Support Pad - 7mm Thick

RUBBER DISCS DESIGNED FOR AREAS WITH RESTRICTED HEIGHT THRESHOLDS TO RAISE PAVING OR DECKING OFF THE SURFACE BUT STILL OFFER SUFFICIENT DRAINAGE.

Wallbarn has designed a new 7mm thick rubber disc for paving complete with integrated spacing lugs.

The pad will lift paving off the surface by 7mm, making it ideal for retro-fit projects and areas with very low height thresholds.

The upper surface of the pad contains drainage channels which run out to the edges of the circular disc, meaning that rainwater will drain off the upper surface of the disc effectively.
The plastic positioning lugs are incorporated into the pad as they plug into a small hole in the centre of the pad or disc. This ensures that the paving slabs are clearly separated from each other with regular spacing between them, and are held securely in place.

The 7mm disc is suitable for use with paving slabs and also timber decking. The TD headpiece has side bars 60mm apart, meaning a standard 2” / 50mm wide timber joist can be placed between the bars. The joists will form a framework structure for the decking system and the decking planks are fixed to that framework.

The product is sold as a two part unit, the rubber disc and positioning lug (available for either paving or timber decking) supplied together.

Since the discs are made from rubber, they have a soft, flexible, hard wearing, non-slip profile; which means they protect the membrane beneath from damage. Rubber will also offer acoustic properties and create a separation layer from the deck.
They are extremely tough and durable and will also not become brittle in cold weather.

These pads are ideal for areas where a very tight height threshold is present, for example, on refurbishment projects. In certain circumstances it may be easier to simply overlay the existing surface with a new layer of suspended paving or decking rather than take everything up, and with the 7mm discs this is possible.

As with all the Wallbarn supports range there is no mechanical fixing required, the surface is secured by the weight of the slab. This cuts down weight on the roof and also the hassle and mess of laying slabs into mortar. This leads to easier, cheaper and faster installation and makes post-installation site inspection or leak detection much easier.

• Paving or decking for very tight height thresholds possible
• Correct positioning of paving slabs and holding them securely in place
• Uniform spacing between paving
• Separation of paving slabs from the base structure.
• Water drainage below the paving level.
• Sound insulation.
• Resistance to extreme hot and cold weather conditions
• Tough flexible material – do not slip on the surface
• Labour saving – cost saving
• Clean and tidy, avoids the need for sand and cement
• Easy maintenance, inspection and repair