Wallbarn Balance Paving Pedestal - H25-50mm (With 2 Extension Plates)

Est. delivery: 2-3 Working Days
Est. delivery: 2-3 Working Days
Key Highlights
- Brand : Wallbarn
Wallbarn Balance Paving Pedestal - H25-50mm (With 2 Extension Plates)
Wallbarn announces the launch of its new BALANCE adjustable pedestals for paving. These specially designed self-levelling headpieces have been developed to give installers of paving slabs extra scope and flexibility to accommodate differences in the deck surface below the pedestal.
Sometimes blemishes and ridges in the sub-deck, or changes in thickness of the actual slab can make the upper surface uneven at certain points. The BALANCE adjustable pedestal for paving helps alleviate these issues.
This unique design is robust, stable and durable. The headpiece is comprised of four separate parts which have been created to allow up to a 5% or 2.86° slope correction. The mechanism at the bottom of the headpiece allows smooth movement and positioning of the paving slab. Slips and sharp tilting are avoided owing to the superior design and solid manufacture. The headpiece section attached to this moving mechanism is 120mm in diameter with integrated positioning lugs moulded into it.
A rubber anti-shock pad slots onto the headpiece over a series of ridges to give better grip to the slab and to help insulate against vibration and noise travelling through the pedestal to the deck beneath. A fixing plug is set in the centre of the headpiece to lock all parts together.
These headpieces are substantial in size and 15mm thick, so the heights of the pedestals are different to the ASP range. A full table of the heights of the new BALANCE range are given below.
Material | Virgin fibre injection moulded polypropylene |
Weight Tolerance* | 683kg |
Maximum Load* | 1,171kg |
Max Temperature | Plus 75 ° C |
Min Temperature | Minus 40 °C |
Base Plate Diameter | 200mm or 150mm |
Extension Plate size | 5mm thick x 150mm diameter for BAL-025 only |
Headpiece Diameter | 120mm |
Lug Height | 18.5mm |
Lug width / thickness | 4mm |
Degree of slope on head | 5% approx. 2.86° |
- Weight Tolerance: 683kg
- Maximum Load: 1,171kg
- Base Plate Diameter: 150mm Or 200mm
- Headpiece Diameter: 120mm