Promenade Tile PU-Adhesive - Rubber Tiles
The PU-Adhesive, from leading promenade tile manufacturer Castle Composites, is a specialist adhesive for the installation of rubber promenade tiles.
As well as providing a strong bond for promenade tiles that gives you confidence for a generation, the adhesive is specially formulated to absorb unwanted moisture and expand to provide support to the tile.
The Castle Composites Promenade Tile PU-Adhesive comes in convenient one litre bottles with an attached nozzle to make a perfect finish easy to achieve. The nozzle is clearly marked so that a simple cut will give an ideal 3-4mm bead for quick and effortless take.
The adhesive is an expanding foam adhesive, so care must be taken not to apply the adhesive too close to the edge of the tiles. Otherwise the foam can be forced up into the gap between the tiles, giving an uneven appearance. In these circumstances it is important to wait until the adhesive is dry before removing it with a knife and using an abrasive pad, such as wire wool, to remove any visible marks on the tiles.
Using the right adhesive with care will give you a hard wearing floor surface, that looks superb and adds genuine value to your home.
One bottle covers approximately 50 tiles (4.35m2 or 50 ft2)