Marley Mendip Anthracite (Smooth) MA12338

In stock
£0.92 ex. VAT £1.10 incl. VAT
  • Buy 201 for £0.88 ex. VAT each and save 4%
  • Buy 502 for £0.84 ex. VAT each and save 9%

Marley Mendip Anthracite (Smooth) MA12338

The Mendip by Marley is a tile with a double pantile design and elegant flowing lines that instantly make it visually appealing. It also provides exceptional strength with the ability to perform at pitches as low as 15 degrees and extended rafter lengths – see the technical sheet below for more detailed information.

Every one of Marley’s concrete interlocking tiles can achieve an A+ rating in the Building Research Establishment's Green Guide to Specification – a grade that is only reserved for supplies with the absolute lowest environmental impact.

All the tiles Marley produces offer excellent covering capacity and are manufactured to the highest industry standards using the best source materials available. Over 100 years in the business has made Marley a household name when it comes to roofing supplies and their loyal client base can vouch for the company’s adaptability and fresh approach.

Projects using the Mendip by Marley can gain extra credits under the BREAAM environmental assessment scheme due to accreditation to the BES 6001 framework standard for Responsible Sourcing.

The Mendip by Marley is available in 7 beautiful colour choices each of which will last a long time and be striking to anyone passing by the house – Anthracite, Antique Brown, Dark Red, Mosborough Red, Old English Dark Red, Smooth Brown, and Smooth Grey.


Size of Tile

420 mm x 330 mm

Minimum Pitch

15° Smooth (100 mm headlap)

17.5° Smooth (75 mm headlap)
30° Granular (75 mm headlap)
25° Granular (100 mm headlap)

Maximum Pitch


Minimum Headlap // Maximum Gauge

75 mm // 345 mm

Cover Width

298 mm (nominal)

Covering Capacity

9.7 tiles /m² at 75 mm headlap
10.5 tiles /m² at 100 mm headlap

Weight of Tiling

46 kg/m² (0.45 Kn/m²) at 75 mm headlap
49 kg/m² (0.48 Kn/m²) at 75 mm headlap

Battens Required

2.9 lin.m/m² at 75 mm headlap
3.1 lin.m/m² at 100 mm headlap

Batten Size Recommended

38 x 25 mm for rafters/supports not exceeding 450 mm centres
50 x 25 mm for rafters/supports not exceeding 600 mm centres

Tile Nails // Hanging Length

70 mm x 3.35 mm // 397 mm (nominal)

No documents were found for this product
No Videos were found for this product