Hambleside Danelaw Dry-Fix Valley Trough for Slate Roofs Pack of Five

Hambleside Danelaw Dry-Fix Valley Trough for Slate Roofs Pack of Five

The Hambleside Danelaw market-leading GRP mortarless dry fix valley trough range provides hidden water gulleys at the roof valleys. These lead alternative troughs create a close-cut appearance on both new build and refurbishment projects and do not require any counter battens and special eaves closure pieces. Being manufactured from GRP, the valley troughs have the following benefits.

• Up to half the cost and time of traditional lead installation

• Semi-skilled fitting procedure

• Light in weight and easy to handle

• 30-year service life guarantee

• Do not streak or stain

• No value to the thief

Joining Hambleside Danelaw Dry-Fix Valley Sections

More often than not, joining a 2-valleys section will be required to achieve a complete valley installation. Hambleiside Danelaw Valleys should be bound by overlapping with the valley closest to the ridgeline overlapping the valley beneath; no sealant is required. Below are different roof pitches correlating with the overlap requirements.

Hambleside Danelaw Dry-Fix Valleys Q & A's 

Question: What is the lifespan of a Hambleside Danelaw dry-fix valley? 

Answer: Hambleside Danelaw dry-fix valley is expected to last at least 20 years. 

Question: How does water run off the Hambleside Danelaw dry-fix valleys?

Answer: The valleys have ripples on each side of the valley, which provides a route for water runoff into the gutter.

Question: Should I still use valley boards for dry-fix valleys ? 

Answer:  Yes, valley boards are still imperative for installation; they should be a minimum of 12mm thick and supported by barriers. For the complete installation guide, click here.