About our articles

The content contained in this Good Roofing Guide article is for information purposed only. While every effort is made to ensure this article is accurate at the time of posting, JJ Roofing Supplies would recommend that you always seek to use a professional roofer for completing all roofing related jobs.

JJ Roofing Supplies will not accept liability for injury, loss or damage from the use of this content.

Videos

How to install a Velux Integra Electric Roof Window - Part 5

How to set up the bluetooth controls

In this five-part guide, we take you through the full installation of a Velux GGU Centre Pivot Integra Roof Window onto an interlocking tile roof using a Velux EDW Flashing Kit and a BDX Insulation Collar.

In Part 5, with the window full installed and waterproof, we show you how to set up the Velux Remote Control. This control will allow you to open and close the window remotely or set it to a timer. We also demonstrate how the rain sensor works.

The installation is now fully complete, if you’ve missed anything you can view all of the previous parts here:

Part 1: Unboxing the window and preparing it for installation
Part 2: Installing the Brackets and preparing the Roof Opening
Part 3: Installing the BDX Underfelt Collar and Transverse Drainage Gutter
Part 4: Installing the Flashing Kit and finishing the installation

Video Transcription

Now, with all the weathering completed and the window now watertight, the last step we need to do is to connect the window up to the power supply so we can programme the window into the remote control. Now, although the window is provided complete with a three pin plug, it doesn’t mean that's the only means you have of connecting it to the mains power. If you wish to conceal all of the cabling behind your internal plasterboard, your internal finish, it's perfectly acceptable for you to chop the plug off and hardwire it into a fused or a switched spur if that's your preference. But for the purpose of the exercise today and for this video, we have an extension that we're going to use so we can get the power connected. One thing to bear in mind is now I’ve made that connection, as soon as the mains power is initially supplied to the window, you have ten minutes to programme the remote control into the motor. That motor is currently sending out a secure signal which our remote control is going to synchronise with.

After ten minutes, that security signal will expire and if you do overrun, you will need to open up the window manually and use the small reset button on the motor to generate a new signal. So without any further haste, I’d better open up the remote control. So we peel this sticker back. Open up the packaging and you can see inside, the remote control complete with its holder. You also have our quick start guide and as you can see there, it’s in a variety of languages. We're often asked why are our instructions predominantly in pictorial form. Here is one of the simple explanations. Any time we insert text, we need to obviously incorporate various translations because we sell our products around Europe and the globe.

So as you can see here, for what is essentially approximately 12 pages of text about setting up the window, we need two books to cover that. So the remote control is magnetic. So you can see within the casing here, that because of the magnetic strip underneath, I can hold this upside down without any fear of this dropping on the floor. So if you wish, you can fix this case to a wall using these fixing points at the back. To release the back, you simply pop that little button in and this back plate comes away. You can secure that to the wall and then this will hold magnetically into the case. For additional security, if you're worried about the remote control disappearing, when you pop off the battery cover here using this small, little button, you can see on this back plate you could actually screw the back plate directly into the wall itself, so it provides a little bit more security if you were worried about that. The screws and the wall plugs are provided so again, you're not having to rummage about looking for fixings, should you wish to secure this to the wall in your particular room of choice. So using the batteries that come supplied with the remote control, we're just going to peel this little sticker back and pop the batteries into place.

Once we have the final battery in, pop the cover back over and you'll see the screen is now showing that we're ready to set up. Now, this remote control is just using technology that most of us will be familiar with. It's touch screen, scrolling technology. So your first screen is asking you to choose the relevant language. So English is highlighted as default, so when you're happy with your selection, if you wanted to choose a different language, feel free but generally, if you want to pick English then go with English. Once you have that highlighted, you're going to press this small arrow in the corner to confirm your selection. Now it's advising you that the remote control is going to look for products. So hopefully we're still within our ten minute time frame, so when I press this forward arrow, the window starts looking for the product. You'll hear the vent bar opening and closing slightly. If you hear that noise, you know you're going to have success because that’s basically telling you the remote has started the synchronisation process. And here, we have the confirmation screen that our remote control has found one window. If we happen to have had more products and we maybe forgot to turn the power on for one of them, you would just simply use the 'Search again' button once you've turned on the power and it will find that second or third product.

Once you’re happy with all of the products showing there, tap that forward arrow and you have this simple confirmation message telling you that your control pad is now ready. So within the control pad, as we only have one product at this time, there is only one product visible. So it's automatically called itself 'Window Number 1' and you can see we have a symbol here of a window. If you go to 'Add blinds, shutters or awnings,' you'll have different symbols to represent the different products that we have. Across the bottom here are the main function buttons. These two symbols on either side of the remote control are the full close or fully open. Just below that, we have this little bar here and if you slide your finger across, you'll see that you can actually just open the window to whatever percentage you choose fit. Alternatively, you can simply press 'Fully Open' and if you wish to, stop the window at any point during its movement by just tapping the stop button.

The Rain Sensor

So one last thing I want to show you today with regards to the functionality of the Integra window is the rain sensor which we referenced a little earlier. This is part and parcel of the window. It comes as standard and you don't have to worry about ordering this as an additional extra. But its main purpose is naturally to help protect you and your flooring in the event of a heavy downpour. So if you happened to be outside in the garden or you've gone away somewhere and we suddenly get a little flash shower, the rain sensor will look after the window for you. So as soon as this starts to pick up any form of moisture, it will automatically determine that as rain and will start to close the window. So here, we have a little pipette of water so we're going to try and scientifically show you and replicate a little bit of natural rainfall. So a few drops on the rain sensor, and usually within 20 seconds at most, the window will begin to close. And as you can see, the window can take approximately 20 seconds to close on the rain sensor itself. If you happen to have initiated the silent mode operation of the window where it's a little slower but a little more quiet, don't worry; the rain sensor still operates at full speed because it's all about closing the window as quickly and efficiently as possible.


Related Products

Our Top Videos.

How to install a Velux Integra Electric Roof Window (5 Parts)

In this five-part guide, we take you through the full installation of a Velux GGU Centre Pivot Integra Roof Window onto an...

Read More

How to install a Duratech Centre-Pivot Pine Roof Window

Once you begin unpackaging the window, you’ll find in the box the brackets, the handle and the fixings. And there will also be some instructions...

Read More

How to install a Velux Centre-Pivot Roof Window (4 Parts)

In this four part guide, Mark Dymond – Velux Technician installs a Velux GGU Centre Pivot Roof Window onto an Interlocking Tile Roof...

Read More

Ideas & Advice

How-tos, tutorials and videos

How and why to use or snap a chalk line

Chalk lines are the fastest way to mark straight guidelines on flat surfaces. They are used extensively in the building and construction industry to speedily and accurately ‘draw’ straight lines between two points. Chalk lines are inexpensive tools...

Skylight Blinds: A Guide To The Different Types

Like many household product, blinds for skylight windows come in all shapes, sizes, and materials. Some are designed with a tangible purpose in mind, while others are more for show. One thing’s for sure - buying any type of skylight blind...