Decra Elegance D Ridge Mocha

£16.58 ex. VAT £19.90 incl. VAT
Est. Delivery : 3-5 Working Day(s)
  • Use with Elegance Tiles
  • For use at both ridges & hips
  • In both duo and monopitch ridges
  • Use with ventilated and unventilated ridges
  • Length: 1200mm

Decra Elegance D Ridge Mocha

The Decra Elegance D Ridge Cap is to be used with the Decra Elegance Tiles. The unit is a traditional D shaped angle cap made to be applied at ridges and hips when finishing and detailing at the roof edges.

The D Ridge Cap is suitable for use in both ventilated and unventilated ridges and is can be applied in duo pitched as well as mono pitched ridge details.

The D Ridge Caps feature a tapered design along their length. This is to allow for effective overlap and connection, as the wider end is to be placed over the narrower end of the ridge cap below. (Ensure the overlap in 80mm). When installing the caps, 4 Decra Fixing Nails are used on each side to fix the cap into position.

If your roof has a pitch greater than 35°, the return angle of the shorter downturned leg of the cap will need to be adjusted accordingly. The installation procedure does vary in ventilated as opposed to unventilated ridges so ensure that the correct one is followed.

When using the D Ridge Caps monopitch ridges, you will need to adjust one side of the ridge cap. You can do this by straightening or flattening out one side of the unit. The caps are available in each of the 6 colours of the Decra Elegance Tile range so that a more seamless, more aesthetically pleasing finish is achieved at the ridges and hips. The longer sides are 110mm wide and the downturned 'leg' flaps are 40mm in width.

No documents were found for this product
No Videos were found for this product