Cure-It GRP D300 Wall Fillet

The Cure-it D300 trim will create a seamless joint between an abutment wall and decking. It is made from a thin but strong mold, resistant to hard-wearing conditions, which flat roofs are often faced with in the UK.

Cure-it D300 Installation guide

Nail the 110mm side to the deck using a large-headed nail every 150mm. If you require joining D300 trims, simply overlap the trims by 50mm and use adhesive to create a strong bond. Cure-it trims are designed to be compatible with GRP. Repeat the cure-it laminate process to blend and watertight the trim onto the roof. The C100 flashing is to be installed above the trim at the end of the installation process.