Cure-It GRP D260 Wall Fillet
Est. delivery: 2-3 Working Days
Est. delivery: 2-3 Working Days
Key Highlights
- Over 35 Years Of Trading
- Expert Assistance
- Huge Stock
- Best Price Promise
- 9 Store Locations
Products - You may also need
Cure-it D260 Wall Fillet Trim
The Cure-it D260 trim will create a seamless joint between an abutment wall and decking. It is made from a thin but strong mold, resistant to hard-wearing conditions, which flat roofs are often faced with in the UK.
Cure-it D260 Installation guide
Nail the 50mm side to the deck using a large-headed nail every 150mm. If you require joining D260 trims, simply overlap the trims by 50mm and use the specified PU Adhesive to create a strong bond. Cure-it trims are designed to be compatible with GRP. Repeat the cure-it laminate process to blend and watertight the trim onto the roof. The C100 Simulated Lead Flashing is to be installed above the trim at the end of the installation process.
- Brand: Cure-it
- Length: 3m
- Trim Size: 140mm x 50mm x 30mm
Cure-it D260 Wall Fillet Trim
The Cure-it D260 trim will create a seamless joint between an abutment wall and decking. It is made from a thin but strong mold, resistant to hard-wearing conditions, which flat roofs are often faced with in the UK.
Cure-it D260 Installation guide
Nail the 50mm side to the deck using a large-headed nail every 150mm. If you require joining D260 trims, simply overlap the trims by 50mm and use adhesive to create a strong bond. Cure-it trims are designed to be compatible with GRP. Repeat the cure-it laminate process to blend and watertight the trim onto the roof. The C100 flashing is to be installed above the trim at the end of the installation process.
