Cromar Aluminium Paint
A solvent based bituminous Aluminium Paint containing a specially selected grade of bitumen and a leafing grade aluminium flake, which provides a solar reflective finish for bituminous roof surfaces, steel and corrugated iron. Application must be in two coats, the second coat must be applied 24 hours after the first coat. Freshly applied coatings should be allowed to weather for three to four weeks prior to the application of the Aluminium Paint. STIR THE CONTAINER THOROUGHLY BEFORE USE to ensure that no deposits are left on the bottom of the container. Apply by brush, roller or spray. Do not brush excessively as this causes softening of the substrate and staining. Do not apply in wet weather or when rain is threatened or when poor drying conditions exist. The rate of application is between 5-10m2per litre per coat depending upon the condition of the surface. The product has a storage life of 12-18 months, under good conditions. Store in a cool dry place away from all sources of ignition In tightly closed containers.
ALUMINIUM PAINT AS THIS COULD CAUSE GASSING. DO NOT APPLY IN TEMPERATURES BELOW 5oC