Code 8 760mm x 6m (30inch) Roofing Lead Roll

View product details
1 Excl. VAT £602.78 Incl. VAT Excl. VAT £680.02 Incl. VAT Excl. VAT
Out of stock
SKU
549

Est. delivery: 7-10 Working Days

View delivery options

 

Code 8 760mm x 6m (30inch) Roofing Lead Roll

Code 8 Lead is 3.55mm thick(a 12.7% increase over code 7 lead) and weighs 40.26kg/m2 (Thickness to BS EN12588 tolerances of +/- 5%)

If the roof you are working on is on a listed building, historical building or a concert hall or museum, code 8 lead is often used and is suitable for just about every aspect of pitched roofing or flat roofing.  Parapet gutters or tapering valley gutters are the applications where the increased gauge of code 8 is most appropriate.  

It is worth noting that you may find that the existing configuration was installed before the days of the BS6915 Code of Practice and therefore the bay lengths may exceed current recommended limits.

It is therefore important that the roofing contractor doing the work is experienced enough to recognise and correct the problem, or risk failures resulting from oversized gutters, primarily fatigue cracks.

As with some of the slightly thinner gauges of lead, the increased thickness means that code 7 lead has increased resistance to thermal movement and you can safely keep the maximum length of flashing at 1.5metres.  JJ Roofing Supplies standard roll lengths of 3 and 6 metres will therefore give you either 2 or 4 lead flashing strips to work with.

As with all lead work, it is important to use a grey lead sealant that allows for expansion and contraction during heating and cooling, giving a permanent, flexible, waterproof joint which is quicker and easier to use than mortar and helps prevent the mould, rot and other water damage that can result.

As code 8 lead is the thickest of all standard gauges of lead , it is of particular importance to apply patination oil to all the newly laid lead, on the underside of flashing as well as on all exposed surfaces, New lead can develop a corrosion product, lead carbonate, in damp or rainy conditions which leaves a non-adherent coating on the surface of the lead which isn’t pleasant and can provide an area of potential water ingress.

The simple solution for this is the application of a thin coat of patination oil on all newly installed items, ensuring that you get a great looking finish both before and after the final patina develops.

Write Your Own Review
You're reviewing:Code 8 760mm x 6m (30inch) Roofing Lead Roll

FREE DELIVERY on Duratech Pitched Roof Windows and Accessories on orders over £50 (Exclusions apply)

All other Delivery Charges are based on weight and location, please add products to your basket to calculate shipping.

A small amount of product lines from particular manufacturers listed below will incur a supplier delivery surcharge.


Next Day Delivery available on orders of stocked items if placed before 2pm

Deliveries will be made between 8am and 6pm. Delivery times apply to weekdays only.


Delivery of Windows to England, Wales, and the majority of Scotland:

Delivery of Windows to the Channel Islands, Scottish Highlands, Northern Ireland, Isle of Man

(postcodes IV, HS, KA27-28, KW, PA20-49, PA60-78, PH17-26, PH30-44, PH49-50, ZE, AB)

Basket Value Price (£)
0-£249 £20
Over £250 £50

It is with regret that we cannot offer a service to these areas for orders over 126kg but please call us on and we will attempt to organise a delivery to your custom if required.


Supplier Delivery Charges

Please note the following supplier delivery surcharges:

Ariel Plastics = £25.00

Britmet Tileform= £35.00

Lead Products(orders under 250kg) = £50.00

Marley Eternit roof tiles (orders under a pallet) = £75.00

Marley Eternit sheeting (exclusions apply) = £50.00

Redland = £100.00

Palram = £25.00

Please phone us on if you are unsure.