ClassicBond EPDM Pressure Sensitive RUSS Strip 1m Length
ClassicBond EPDM Pressure Sensitive RUSS (Reinforced Universal Secure Strip) is used for securing EPDM membranes to the substrate of a roofing system. EPDM is similar to most single ply material, in that over the course of time it will attempt to shrink by up to 10% back towards the centre. The base tie in (RUSS) is essential as it controls membrane movement and ultimately prevents it pulling away from areas where the membrane turns up at angle changes.
The PS RUSS Strip has tape pre-applied along one edge, it can be installed horizontally or vertically, and is designed for use with ClasscBond EPDM primer and the appropriate fasteners as part of a ClassicBond installation, and is ideal for securing perimeters and around penetrations. It is suitable for use on ballasted, fully adhered or mechanically fastened EPDM roofing systems, providing additional strength of the membrane in areas such as walls, curbs and expansion joints.
The strip is sold in 1m lengths but will distributed in one continuous strip specific to your order (as long as this is not more than 30m). The strip is 76mm wide and 1.14mm thick.